Saivod SAPH98 Manual Del Usuario página 38

Remote Control
1. Power 2. Timer 3. Down 4. Mode 5. Up 6. Fan 7. Sleep
The remote control uses two AAA batteries, both of which should be new and replaced at
the same time when they run out.
Operation Methods
Mode
After machine turns on, default value is cooling mode with 22℃ and low fan speed.
Press " MODE" to select cooling, dehumidifying and fan ,Heating mode, indictor turns on
which one you choose .
Press " UP" or " DOWN" to adjust temperature ( from 16℃ to 31℃).
Press " FAN" to select high or low fan speed.
Fan mode
Press " MODE" to select fan mode, fan mode indicator turns on .
Press " FAN" to select high speed or low speed.
Temperature and sleeping function cannot be setup.
Timer mode
Under standby mode, press "TIMER" to setup the power-on time. Timer indicator turns on.
Under power-on mode, press "TIMER" to setup power-off timer. Timer indicator turns on.
Dehumidifying mode
Press "MODE" to select dehumidifying mode, dehumidifying mode indicator turns on .
Under dehumidifying mode, sleeping function cannot be setup, and fan speed is low.
38
JHS.indd 38 2018/1/24 17:10:14