Customizing Your Monitor; Adjusting The Picture Brightness; Adjusting The Contrast - Sony CPD-L133 Manual De Instrucciones

Customizing Your Monitor

Before adjusting
Connect the monitor and the computer, and turn them
on.
Wait for at least 30 minutes before making adjustments
for the best result.

Adjusting the Picture Brightness

Once the brightness is adjusted, it will be stored in memory
for all input signals received.
1
Press the ‹ (brightness) ø button.
The BRIGHTNESS OSD appears.
2
Press the +/– buttons.
+ . . . for more brightness
– . . . for less brightness
The OSD automatically disappears after about 3 seconds.
* The horizontal and vertical frequencies for the received input
signal appear in the BRIGHTNESS OSD.
If the screen is too bright when using the monitor in a
dark room
Decrease the BACKLIGHT (page 14).
BRIGHTNESS
26
48. 4kHz / 60Hz
Horizontal Vertical
Frequency* Frequency*
Getting Started
Customizing Your Monitor

Adjusting the Contrast

Once the contrast is adjusted, it will be stored in memory for
all input signals received.
1
Press the > (contrast) ‡ button.
The CONTRAST OSD appears.
2
Press the +/– buttons.
+. . . for more contrast
– . . . for less contrast
The OSD automatically disappears after about 3 seconds.
* The horizontal and vertical frequencies for the received input
signal appear in the CONTRAST OSD.
CONTRAST
26
48. 4kHz / 60Hz
Horizontal Vertical
Frequency* Frequency*
EN
F
D
ES
I
9