Typical Installation - Samoa PUMPMASTER 2 Guía De Servicio Técnico Y Recambio

TYPICAL INSTALLATION

See figures 3a and 3b for a typical installation with all the recommended
accessories for the pump to operate correctly.
DRUM MOUNTED PUMP
Fig. 3a
WALL MOUNTED PUMP
Fig. 3b
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
NOTE: The compressed air supply must be between 3 and 10 bar (40
– 140 psi), working air 6 bar (90 psi) is the recommended air working
pressure. An air shut-off valve must be installed, in order to close the
compressed air line at the end of the day. (If the air inlet not is closed
and there is a leakage at some point of the oil outlet circuit, the pump
will start automatically, emptying the container).
Pos. Description
1 Nipple
2 Air hose
3 Quick coupling
4 Connection nipple
5 Pump
6 Outlet hose
7 Wall bracket
8 Nipple
9 Suction hose
10 Valve
11 Nipple
12 Nipple
A Valve
B Nipple
C Filter regulator
D Valve
E Safety valve
EN
Part No.
945516
246010
253114
259014
353110
362101
360102
945552
362400
950306
945555
945565
Optional
950319
239000
240500
950300
609007
3
R. 03/18 835 807