Content Organization And Consultation Methods; General Warnings And User Information - BSVILLAGE SP 3600 Manual Del Usuario

EN
1. Content organization and consultation
methods.
1.1. Symbols.
Indicates hazardous situations and warnings.
Carefully read the parts of the user manual
marked with this symbol.
Indicates that work must not be performed on
live electrical devices.
This work may only begin after all suitable safety
measures required by current international and/or
national regulations are taken.
1.2. Notes on graphics.
Used the following printing types:
• glossary of terms: italic;
• the words "product", "customer manual" and
"installation manual" highlighted.
1.3. Glossary.
1. Pump: electromechanical device used to move air.
2. Inlet: product input (Fig. 3, IN).
3. Outlet: the product's exit (Fig. 3, OUT).
4. Flowrate: the amount of fluid (water) that
crosses a section in a unit of time.
5. Head: this is the maximum distance that a pump
can lift water for.
6. Flooded: if the pump is positioned at a level
below the water level to be sucked.
7. Bearing: this is a mechanical device used to
reduce attrition between two rotating objects.
8. Rotor: it indicates all the rotating components of
the pump
9. Impeller: The front part of the rotor, made up of
a plastic disc with small blades. With its rotation,
it transmits to the water the necessary mechan-
ical energy (Fig. 19, # 8) to move water from
the inlet to the outlet area.
10. Mechanical seal: a mechanical device is liable
to isolating the two environments, among which
there is a shaft with a circular motion (Fig. 19, # 10).
11. Dry operation: means the product's operation
without water.
12. Thermal protector: the device that cuts of pow-
er to the product if the product overheats.
13. Residual Current Device: (RCD) also called
fuse, it is an electro-technical device able to cut
off the circuit in the event of fault.
14. Hydraulic parts: components used to create the
system where the product is used (pipes,valves,
couplings, hose connections, etc.).
15. Pool: artificial tank filled with water general
intended for swimming or other aquatic acti-
vities.
16. Filter: a device where the water flowing in
order to retain and/or eliminate the solid parti-
cles suspended.
17. Skimmer: a filter that keeps the swimming pool
surface clean.
18. Power plug: mechanical connector that can be
inserted in a complementary electrical socket
(power outlet).
18

2. General warnings and user information.

2.1. Warranty.
2.1.1. General aspects.
2.1.2. Special conditions.
2.1.3. Restrictions.
MANUALE_SP3600_BWT-A5 - Rev: 01/2020
i. In accordance with these provisions, the dealer
guarantees that the product covered by this war-
ranty ("the product") does not have any complian-
cy defect upon delivery.
ii. The product is guaranteed for two (2) years from
the date of delivery to the purchaser.
iii. If a product compliance defect is found and the
purchaser informs the dealer during the warranty
period, the dealer must repair or replace the prod-
uct at his own expense and where he deems most
suitable, unless impossible or incommensurate.
iv. Should the product be irreparable or irreplace-
able, the purchaser may request a proportionate
price discount or, if the compliance defect is suffi-
ciently significant, the termination of the sales
contract.
v. Parts replaced or repaired under this warranty do
not extend the original product warranty period
but are covered by their own guarantee.
vi. Proof of product purchase is required for warran-
ty validity.
vii. After six months from product delivery to the pur-
chaser and compliance defects are found, the
purchaser must prove the origin and existence
of the defect.
viii.This warranty certificate does not restrict or jeop-
ardise consumer rights provided by mandatory
national regulations.
i. This warranty covers the products referred to in
this user manual.
ii. This warranty certificate only applies within the
European Union.
iii. For warranty validity, the purchaser must strictly
follow the manufacturer's instructions included in
the documents that accompany the product, when
applicable according to the product range and
model.
iv. Should a replacement, maintenance or cleaning
schedule be specified for some product parts or
components, the warranty is only considered valid
if these schedules are correctly observed.
i. This warranty only applies to sales to consumers
where "consumers" are the people who purchase
the product for personal, and not professional,
use.
ii. The warranty does not cover normal product
wear. As for replaceable or consumable parts,
components and materials such as rotors, bear-
ings, light bulbs, o-rings, gaskets, sponges, car-
tridges, etc., that provided in the documentation
that accompanies the product shall be observed.
iii. The warranty is null and void in the event the
product:
a. is subject to incorrect treatment;