Preparation For Use - Echo DCS-5000 Manual Del Operario

DCS-5000

Preparation For Use

Saw chain is sharp! Always wear gloves when handling
assembly, otherwise serious personal injury may result.
Note: The machine may be delivered with guide bar and saw chain
separated. Install guide bar, saw chain as follows.
Guide Bar and Saw Chain Installation / Removal
1. Release chain brake (A).
2. Loosen nuts (B) and remove
sprocket cover (C).
3. Mount the guide bar (D) and slide
toward sprocket (E) to make saw
chain installation easier.
4. Install saw chain as shown (ensure
cutters are pointing in the right
direction).
5. Install the sprocket cover over the
guide bar studs.
99922205708
© 08/2021 ECHO Incorporated
DESCRIPTION
C
B
E
D
A
19