Checking Chain Tension; Chain Lubrication Test; Cutting Instructions - Echo DCS-5000 Manual Del Operario

OPERATION

Checking Chain Tension

Do not operate with a loose chain. Serious injury can occur.
Chain tension should be checked
frequently during work and corrected as
necessary.
Tension the chain as tight as possible,
but so it can still be pulled easily along
the guide bar by hand.

Chain Lubrication Test

Hold the chainsaw just above a dry
surface and depress trigger switch to
half speed for 30 seconds.
A thin line of "thrown" oil should be seen
on the dry surface.

Cutting Instructions

General
◆ This chainsaw is designed for cutting wood. Do not cut
metal, plastic or any non-wood material.
◆ Wear suitable hearing
protection such as earmuffs
or earplugs to protect
against objectionable or
uncomfortable loud noises.
26
DCS-5000
99922205708
© 08/2021 ECHO Incorporated