Uline H-9635 Manual Del Usuario página 6

LIGHT KIT ASSEMBLY
1. Line up light brackets (9) with uprights at desired
height.
2. Secure light brackets to uprights with four 2" bolts
and M6 flange nuts. (See Figure 16)
Figure 16
3. Place light steel beam (10) at desired depth
underneath brackets. Fasten to brackets (9) with
two 4¾" bolts and M6 flange nuts. (See Figure 17)
NOTE: 48" light kit does not include steel beam.
Skip to 4b.
Figure 17
4a. For 60", 72" and 96" Light Kits: Place two "S" hooks (11)
at desired mounting points along the steel beam (10)
and secure with two M6 flange nuts. (See Figure 18)
Figure 18
PAGE 6 OF 24
OPTIONAL ACCESSORIES CONTINUED
Bolt
Flange
Nut
4⁄" Bolt
Flange Nut
4b. For 48" Light Kits: Place two "S" hooks (11) at desired
depth underneath bracket. Fasten to brackets (9)
with two M6 flange nuts. (See Figure 19)
5. Attach hanging chains to LED shop light (8) and
mount to "S" hooks. (See Figure 20)
Figure 20
SHELF DIVIDER ASSEMBLY
1. Line up front "C" channel of divider (12) with front
lip of top shelf. Insert divider into front lip at angle.
Once in place, allow divider to drop and magnetize
to back shelf lip. (See Figure 21)
Figure 21
Back
Shelf Lip
Front
Shelf Lip
Figure 19
Front "C"
Channel
0322 IH-9635