Cable Management - Uline H-9635 Manual Del Usuario

CABLE MANAGEMENT

1. To remove covers, use a Phillips screwdriver to
unscrew the two screws securing covers to the
monitor arm. This allows user to slide cables through
covers. Once complete, re-secure the covers to the
monitor arm using the Phillips screws. (See Figure 28)
Take off covers and put cable in.
Figure 28
FAN ASSEMBLY
NOTE: Fan (15) comes with 6" and 10" long
bracket. Choose desired bracket based on
application.
1. Slot 6" or 10" fan mounting bracket (16 or 17)
between opening in fan upright mounting
bracket (18). Align holes of each bracket and
attach using two M6 x 12 mm hex bolts and
two M6 flange nuts. (See Figure 29)
Figure 29
Upright Mounting
Fan Mounting Bracket
PAGE 8 OF 24
OPTIONAL ACCESSORIES CONTINUED
Insert screw to lock covers.
Bracket
2. Align hole on the opposite end of fan mounting
bracket to the hole on the crescent fan bracket.
Attach using M12 x 20 mm hex bolt, M12 washer,
M12 lock washer and M12 hex nut. (See Figure 30)
Figure 30
3. Align fan assembly with uprights at desired height.
4. Secure fan assembly to uprights with two M6 x 40 mm
hex bolts and two M6 flange nuts. (See Figure 31)
Figure 31
1-800-295-5510
uline.com
0322 IH-9635