Electrolux ENZ34700X Manual De Instrucciones página 16

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

16 electrolux
The manufacturer declines all responsibility if
the above safety precautions are not ob-
served.
This appliance complies with the E.E.C. Di-
rectives.
Removing the transport support
Your appliance is equipped with transport
support to secure the door during transpor-
tation.
To remove them do these steps:
1. Open the door.
2. Remove the transport support from the
door sides.
3. Remove the transport support from the
lower hinge (some models).
Important! Some models are fitted with a
silencing pad under the cabinet. Do not
remove this pad.
3
Removing the shelf holders
Your appliance is equipped with shelf retain-
ers that make it possible to secure the
shelves during transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction of
the arrow (A).
2. Raise the shelf from the rear and push it
forward until it is freed (B).
3. Remove the retainers (C).
All manuals and user guides at all-guides.com
Rear spacers
Install the spacers provided within the ac-
cessory bag as shown in the figure.
Install the spacers on the back side of the
panel.
Levelling
When placing the appliance ensure that it
2
stands level. If necessary adjust the feet us-
ing the adjustment spanner supplied.
Installation of the Taste Guard filter
The Taste Guard filter is an active carbon filter
which absorbs bad odours maintain the best
flavour and aroma for all foodstuffs without
risk of odour cross contamination.
On delivery the carbon filter is in a plastic bag
to preserve performance.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido