Electrolux ENZ34700X Manual De Instrucciones página 6

6 electrolux
To switch on the function:
1. Press the Mode button until the corre-
sponding icon appears
The Quick Chill indicator flashes.
The fridge temperature indicator shows
the set temperature.
2. Press the OK button to confirm.
The Quick Chill indicator is shown.
When the cooling is finished return the air
lever (1) towards minimum.
To switch off the function:
1. Press the Mode button until the Quick
Chill indicator flashes.
2. Press the OK button to confirm.
3. The Quick Chill indicator goes off.
4. The Eco Mode function is restored if it has
been previously selected.
The Quick Chill function stops automatically
after approximately 6 hours.
The Quick Chill bottle holder can be removed
if not used.
Shopping function
If you need to insert a large amount of warm
food, for example after doing the grocery
shopping, we suggest activating the Shop-
ping function to chill the products more rap-
idly and to avoid warming the other food
which is already in the refrigerator.
To switch on the function:
1. Press the Mode button until the corre-
sponding icon appears.
The Shopping indicator flashes.
The fridge temperature indicator shows
the set temperature.
2. Press the OK button to confirm.
The Shopping indicator is shown.
All manuals and user guides at all-guides.com
The Shopping function shuts off automati-
cally after approximately 6 hours.
To switch off the function before its automat-
ic end:
1. Press the Mode button until the Shopping
1
2. Press the OK button to confirm.
3. The Shopping indicator goes off.
Important! The function switches off by se-
lecting a different fridge set temperature.
Action Freeze function
It is possible to place the fresh food to be
frozen in all compartments except the low-
est.
To switch on the function:
1. Press the Mode button until the corre-
2. Press the OK button to confirm.
This function stops automatically after 52
hours.
To switch off the function before its automat-
ic end:
1. Press the Mode button until the Action
2. Press the OK button to confirm.
3. The Action Freeze indicator goes off.
Important! The function switches off by se-
lecting a different freezer set temperature.
High temperature alarm
An increase in the temperature in the freezer
compartment (for example due to an earlier
power failure) is indicated by:
• flashing the alarm and freezer temperature
• sounding of buzzer.
To reset the alarm:
1. Press any button.
2. The buzzer switches off.
3. The freezer temperature indicator shows
4. The alarm indicator continue to flash until
When the alarm has returned the alarm indi-
cator goes off.
indicator flashes.
sponding icon appears.
The Action Freeze indicator flashes.
The freezer temperature indicator shows
symbol.
The Action Freeze indicator is shown.
An animation starts.
Freeze indicator flashes.
indicators
the highest temperature reached for a
few seconds. Then show again the set
temperature.
the normal conditions are restored.