Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
A respirator may be necessary in dusty environments
or when spraying paint. Do not carry while painting.
11. KEEP CHILDREN AWAY.
Do not let visitors contact compressor parts.
All visitors should be kept safely away from work area.
12. DRESS PROPERLY.
Do not wear loose clothing or jewelry. They can be
caught in moving parts.
Wear protective hair covering to contain long hair.
13. MAINTAIN COMPRESSOR WITH CARE.
Please conduct maintenance in accordance with
page 22.
14. STAY ALERT.
Watch what you are doing. Use common sense.
Never stand on the compressor. Do not allow the
compressor to operate unattended. Do not operate
compressor when you are tired. Compressor should
never be used by you if you are under the infl uence of
alcohol, drugs or medication that makes you drowsy.
15. CHECK DAMAGED PARTS AND AIR LEAK.
Before further use of the compressor, a guard or
other part is damaged should be carefully checked
to determine that it will operate properly and perform
its intended function. Check for alignment of moving
parts, binding of moving parts, breakage of parts,
mounting, air leak, and any other conditions that may
aff ect its operation.
A guard or other part that is damaged should be
properly repaired or replaced by a metabo HPT
authorized service center.
Have defective power switches replaced by a
metabo HPT authorized service center.
Do not use compressor if power switch does not turn
it on and off .
16. NEVER USE COMPRESSOR FOR APPLICATIONS
OTHER THAN THOSE SPECIFIED.
Never use compressor for applications other than
those specifi ed in the Instruction Manual.
Following all safety precautions in this manual and the
manufacturer's instructions in the application manual.
Never use compressed air for breathing or respiration.
17. HANDLE COMPRESSOR CORRECTLY.
Operate the compressor according to the instructions
provided herein. Never allow the compressor to be
operated by children, individuals unfamiliar with its
operation or unauthorized personnel.
4
18. KEEP ALL SCREWS, BOLTS AND GUARDS
TIGHTLY IN PLACE.
Keep all screws, bolts, and guards tightly mounted.
Check their conditions periodically.
19. KEEP MOTOR AIR VENT CLEAN.
The motor air vent must be kept clean so that air
can freely fl ow at all times. Check for dust build-up
frequently.
20. NEVER USE A COMPRESSOR WHICH IS
DEFECTIVE OR OPERATING ABNORMALLY.
If the compressor appears to be operating unusually,
making strange noises or vibration, or otherwise
appears defective, stop using it immediately and
arrange for repairs by a metabo HPT authorized
service center.
21. USE ONLY GENUINE metabo HPT REPLACEMENT
PARTS.
Replacement parts not manufactured by metabo HPT
may void your warranty and can lead to malfunction
and resulting injuries. Genuine metabo HPT parts are
available from your dealer.
22. DO NOT MODIFY THE COMPRESSOR.
Do not modify the compressor. Do not drill into, weld,
patch or modify the tanks. Do not make adjustments
to the components that control tank pressure. Do not
make alterations to the factory operating pressure
settings. Do not operate at pressures or speeds in
excess of the manufacturer's recommendations.
Always contact the metabo HPT authorized service
center for any repairs. Unauthorized modifi cation may
not only impair the compressor performance but may
also result in accidents or injury to repair personnel
who do not have the required knowledge and
technical expertise to perform the repair operations
correctly.
23. TURN OFF THE POWER SWITCH WHEN THE
COMPRESSOR IS NOT USED.
When the compressor is not used, turn off the power
switch, remove the battery and open the drain valve to
discharge the compressed air from the tank.
24. NEVER TOUCH HOT SURFACE.
To reduce the risk of burns, do not touch the delivery
pipe, check valve or pump.
These areas can remain hot for at least 45 minutes
after this compressor is shutdown.
Allow compressor to cool prior to servicing.
Publicidad
Tabla de contenido
