Kenwood KDC-BT370U Manual De Instrucciones página 20

SiriusXM® Radio
(for
SiriusXM settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press and hold to exit.
To return to the previous setting item, press
[SIRIUS XM]
Selects the tuning method for S / T buttons when pressed.
[SEEK MODE]
[CHANNEL]: Manually search for a channel. ; [PRESET]: Search for a preset
channel of the selected band. (Automatically search for preset 1 channel if
the current channel is not a preset channel.)
[CHANNEL LOCK] To unlock settings:
1 Turn the volume knob to select a number.
2 Press S / T to move to the entry position.
3 Repeat step 1 and step 2 to enter the current pass code.
(Initial pass code is 0000.)
4 Press the volume knob to confirm.
[CODE SET] 1 Turn the volume knob to select a number.
2 Press S / T to move to the entry position.
3 Repeat step 1 and step 2 to enter a new 4-digit pass code.
4 Press the volume knob to confirm.
5 Repeat step 1 to step 4 to reconfirm the pass code.
• Make a note of the new pass code to enter channel lock settings for next
time.
14
ENGLISH
)
.
Default: [XX]
[LOCK SETTING] [MATURE CH]: Selects the SiriusXM-defined lock setting. ;
[USER DEFINED]: Selects the individual channels the user wants to
lock. ; [OFF]: Cancels.
[CHANNEL EDIT]*1 1 Turn the volume knob to select a category, then press the knob.
2 Turn the volume knob to select a channel you want to lock, then
press the knob.
"L" appears in front of the channel number.
3 Press and hold
[CHANNEL CLEAR]*1 [YES]: Clears all the locked channels. ; [NO]: Cancels.
[TUNE START]*2 [ON]: All qualified music channels in the SmartFavorites will start
playback from the beginning of the song. ; [OFF]: Cancels.
[SIGNAL LEVEL] Shows the strength ([NO SIGNAL]/[WEAK]/[GOOD]/[STRONG]) of
the current received signal.
[BUFFER USAGE] Shows the memory usage ([0%] to [100%]) for Replay buffer.
[SXM RESET] [YES]: Resets all SiriusXM settings to default. ; [NO]: Cancels.
*1 Displayed only when [LOCK SETTING] is set to [USER DEFINED].
*2 Available only if the connected SiriusXM Vehicle Tuner is SXV200 or later which supports
SmartFavorites.
to exit.