Bluetooth - Audio - Kenwood KDC-BT370U Manual De Instrucciones

Bluetooth®
Bluetooth — Audio
• Operations and display indications may differ according to their availability
on the connected device.
• Depending on the connected device, some features may not work with
your device.
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.
Listen to the audio player via Bluetooth
1 Press B SRC repeatedly (or press SRC on the remote control) to select
BT AUDIO.
• Pressing enters BT AUDIO directly.
2
Operate the audio player via Bluetooth to start playback.
To On the faceplate
Press 6 IW.
Play back/pause
Select group or folder Press 2
Reverse skip/ Press S / T.
Forward skip
Reverse/Fast-forward Press and hold S /
T.
22
ENGLISH
On the remote control
Press ENT IW.
/ 1 . Press #FM+/ AM–.
Press S / T (+).
Press and hold S /
T (+).
To
Repeat play
Random play
Select a file from a folder/list
Switch between connected
Bluetooth audio devices
Listen to iPod/iPhone via Bluetooth
You can listen to the songs on the iPod/iPhone via Bluetooth on this unit.
Press B SRC repeatedly to select iPod BT.
• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB
input terminal. (Page 9)
• If you plug in an iPod/iPhone to the USB input terminal while listening to
iPod BT source, the source automatically changes to iPod USB source.
Press B SRC to select iPod BT source if the device is still connected via
Bluetooth.
On the faceplate
Press 4 repeatedly.
[ALL REPEAT], [FILE REPEAT], [GROUP REPEAT],
[REPEAT OFF]
Press and hold 3 to select [ALL RANDOM]
or [GROUP RANDOM].
• Press 3 to select [RANDOM OFF].
Refer to "Select a file to play" on page 11.
Press 5.
(Pressing the "Play" key on the connected
device itself also causes switching of sound
output from the device.)