Tag Display - Gallagher HR4 Manual Del Usuario

3E3020 Gallagher HR4 Hand Held EID Tag Reader User Manual
Tag Display
VID Cross reference
The Hand Held Reader maintains a cross-reference table that links
an animal's Electronic ID with the animal's Visual Tag Number.
Once it makes this link, it will recall the Visual Tag Number
the next time the Electronic ID is read.
Cross-reference information containing EIDs and corresponding
VIDs can be exported to the Hand Held Reader from Animal
Performance in a session or Animal table. The VID is displayed
above the Big ID box on the Reader screen and the EID is displayed
below it when the tag is read. The numbers in the Big ID screen
will be part of the EID or VID depending on your Tag Display setup.
Big ID on display
If there is a cross-reference table that provides the VID for the
scanned animal, you will see both the EID and VID on the screen.
The Big ID field can be configured to show the VID or EID. It can be
used to highlight the part of the VID or EID that is most significant
to you.
To Setup the Big ID field
Full animal VID
EID tag type
1. From the Main Menu, select the
OK
press
2. Using the arrow keys make field selections.
Digits
EID or VID Indicates which ID is displayed in the Big ID box.
Offset
3. Press the
changes.
.
The number of digits (from 3 to 10) are shown in large
type.
Determines the number of digits from the right of the VID
that are ignored for the large digit display (only for VID).
Return
key to exit to the Main Menu and save
Big ID
Full 16 digit EID
Tag Display
icon and
11