Sort Lists - Gallagher HR4 Manual Del Usuario

3E3020 Gallagher HR4 Hand Held EID Tag Reader User Manual

Sort Lists

A sort (draft) list contains a list of animal IDs, each with a sorting
assignment. This assignment may be used to separate animals into
predefined groups, or to flag specific animals for selection.
The Sort Lists screen shows all the sorting lists available on the
reader. These lists are transferred from Animal Performance.
After transferring the draftlists to the reader, they can be used in
the sessions to sort the animals.
Refer to "Synchronising data" (p. 26) for more information.
To view a sort list
1. From the Main Menu, select Sort Lists and
OK
press
HR4 display.
2. To view the contents of a sort list, select a
list and press
A list of groups that make up the sort list
display.
The group colour displays behind the group
number.
The number of tags scanned into each
group is displayed next to the group name.
• To view the sorted animal IDs within a
group, select the group to be viewed
and press OK.
• A list of animal IDs (VID or EID as set in
the Tag Display screen) are shown.
3. Press the
the sort list and again to return to the Main
Menu.
Note: The sort list 'Empty List' is the factory
default and contains no animals. This can be
used to assign sort groups to each animal as it
is scanned, rather than from a predefined list.
Sort lists are compiled or edited in Animal Performance then
transferred to the reader. Changes made to a list will be effective
for all sessions that use the list after the change is made.
Sort (draft) lists can only be viewed and deleted on the HR4.
. The sort lists available on the
OK
.
Return
key once to go back to
13