Gallagher HR4 Manual Del Usuario página 20

3E3020 Gallagher HR4 Hand Held EID Tag Reader User Manual
Note:
The table will be empty if no devices have previously been
found. Any previously connected devices will be displayed in
parentheses, e.g. '(Gallagher-TSi)'.
The Reader can now be searched for and found by other
devices (Discoverable). The status of the current connection is
displayed on the screen.
4. To initiate a connection from the HR4 Reader, press the
Search
This will search for new Bluetooth or WiFi devices in range. As
the name of each device is received it will be displayed,
replacing the Bluetooth or WiFi address.
5. Use the arrow keys to select a device to connect to and press
OK
the
The connection status will change to Trying to connect...
See Info soft-key (following page) for further details when
connecting to Bluetooth.
6. Press
menu.
18
softkey.
button.
Return
key to save settings and return to the Main
Note: The HR4 can
be configured to
send and/or
receive data from
other devices via
Bluetooth and
WiFi.
Important: You may
be prompted for a
passkey code to
complete the
Bluetooth pairing or
WiFi connection.