Features; Auto Power Down - Gallagher HR4 Manual Del Usuario

3E3020 Gallagher HR4 Hand Held EID Tag Reader User Manual

FEATURES

Screen
& Keypad
USB connector under Dust cap
Feature
Trigger
Light
Vibrator
Antenna
USB
connector &
Dust cap
Memory

Auto Power Down

The HR4 will power itself down after 30 minutes of inactivity.
6
Trigger
Description
When in the 'Read Tags' (Collect) screen, pull the trigger
to begin reading tags.
The red light flashes when transmitting and illuminates
continuously when a tag is read.
A single vibration is felt in the handle with every
successful EID tag read.
HR4
The antenna has a read range of 27–33 cm.
Note: If there is more than one tag within range, neither
tag may be read.
The supplied USB cable connects to the
connector beneath the dust cap. This cable enables:
• data to be transferred to/ from a computer; and
• the supplied USB charger to charge the internal
battery.
Replace the dust cap when cable not in use.
• Over 100,000 EID records can be stored in the HR4.
• When the memory is 90% full, a pop up warning will
display.
• When the memory is full, no further tag reads will
be accepted until one or more sessions have been
deleted.
Light
Antenna
HR4
via the