Wireless - Gallagher HR4 Manual Del Usuario

3E3020 Gallagher HR4 Hand Held EID Tag Reader User Manual

Wireless

The HR4 Reader is both Bluetooth and WiFi enabled and can be
searched for and connected to by other devices (Discoverable),
or perform a search to initiate the connection itself. Only one
Bluetooth or WiFi device can be connected to the reader at any
time.
Note: WiFi functionality is only available on HR4 v2 hardware.
Icon Descriptions
Icon
Wireless Setup
1. From the Main Menu screen, use the arrow keys to select the
Wireless icon
2. The Wireless screen will display, showing the last known
connection as either Bluetooth (default for first time
connections) or WiFi.
• To change the type of communication, select the field
where Bluetooth or WiFi is displayed and press OK. Use
the arrow keys to change the communication type and
press OK.
Note: Selecting None will turn off Bluetooth and WiFi, and
will save battery power if a communication connection is not
required.
3. The connection status and device table display and the
connection status changes to 'Discoverable' mode.
Description
Flashing Searching for a Bluetooth or WiFi device
Steady Bluetooth or WiFi device connected
Blue
Grey / No Bluetooth or WiFi connection active,
but Reader is Discoverable, or Reader is
Red line
trying to connect to a device.
No icon Bluetooth or WiFi disabled
OK
and press .
17