Publicidad
16
16
1M
5K
1M
Carefully stand your unit upright.
NOTE: You may need to loosen the mounting and adjusting screws to slide the hinge part way out of the slot before fastening it to the
END. Retighten the screw before you mount the HINGE to the END.
Fasten the LEFT DOOR (L) to the LEFT END (B). Use the screws in the HINGES. See the next step for adjustments.
Fasten a KNOB (5K) to the LEFT DOOR (L). Use a SILVER 7/8" MACHINE SCREW (42S).
Peel a FELT DISC from the FELT DISC CARD (1M) and stick it on the DOOR where it comes in contact with the LEFT UPRIGHT (D).
Repeat this step for the other door.
Page 20
B
L
42S
SILVER 7/8" MACHINE SCREW
(2 used for the KNOBS)
www.sauder.com/services
Adjusting screw (horizontal)
D
Mounting screw (depth)
414942
Publicidad
