Example Of Connections; Starting Up The Unit - PIONEER DJ DJS-1000 Manual De Instrucciones

Example of connections

When using with external devices
Cautions
Match the audio cable channel input to the mixer and the player number.
If a different player number is set, change the [PLAYER No.] setting on the [UTILITY] screen.
= For instructions on changing the settings on the [UTILITY] screen, refer to this product's Operating Instructions.
! When information is being shared with PRO DJ LINK, [PLAYER No.] is displayed in gray and the player number cannot be changed. In such a
case, change the player number after first disconnecting the media and then turning off the link by, for example, disconnecting the LAN cable.

Starting up the unit

1 Connect external devices to this unit as described in Connections (p. 9 ).
2 Press the [u] switch on the rear panel of the unit.
The indicators light up and this unit turns on.
10
En
Audio cable
LAN cable
PRO DJ LINK compatible DJ system
MIDI cable
Audio cable
Synthesizer, etc.