Optional Accessory; Carrying Tool - Makita UA002G Manual De Instrucciones

When cutting thick branches, first make a shallow
undercut and then make the finish cut from the top.
1
Fig.34
If you try to cut off thick branches from the bottom, the
branch may close in and pinch the saw chain in the cut.
If you try to cut off thick branches from the top without a
shallow undercut, the branch may splinter.
Fig.35

Carrying tool

Before carrying the tool, always remove the battery car-
tridge from the tool, then attach the guide bar cover, and
then shorten the pipe. Also, cover the battery cartridge
with the battery cover.
1
Fig.36
► 1. Guide bar cover 2. Battery cover
2
2
17 ENGLISH
Using the tool with portable power
pack

Optional accessory

Use the hanging band when you use the tool with porta-
ble power pack.
Attaching the hanging band
1.
Attach the hooks of the hanging band to the rings
of the shoulder harness or waist belt as shown in the
figure. Select the type of band and the connecting
method appropriate for your usage.
Fig.37
► 1. Ring 2. Hook
Fig.38
► 1. Ring 2. Hook
2
1
2
1