Sauder litterbox 429322 Manual Del Usuario página 15

Step 10
NOTE: Do not completely tighten the SCREWS in this step.
å
Fasten the BACK BRACE (O) to the END FRAMES (J and K). Tighten
å
four 1/2" HEX HEAD SCREWS (17) using the L-WRENCH (10).
NOTE: You should start each SCREW a few turns before
å
completely tightening any of them.
1/2" HEX HEAD SCREW
(4 used in this step)
www.litterbox.com/support
10
17
O
J
429322
K
Page 15