Angelcare AC017 Manual Del Usuario página 30

TO STOP THE ALARM
IMPORTANT
• Test your monitor before first use.
• Test your monitor regularly to ensure it is functioning correctly.
• Test your monitor every time you move the Sensor Pad to a different place.
4.2 - PAUSING AND RESTARTING THE SENSOR PAD:
Allows you to pause the Sensor Pad if you remove baby from the cot,
e.g. for feeding or comforting.
IMPORTANT
• If you do not pause the Sensor Pad, the alarm will sound if there is no movement detected on the surface
of babys mattress after 20 seconds.
• Ensure to unpause the Sensor Pad before putting baby back in the cot.
4.3 - TO ADJUST THE SENSOR PAD SENSITIVITY LEVEL:
To ensure adequate monitoring of your child's movements, you can adjust the sensitivity of the Sensor Pad. Set a
high sensitivity for a newborn and a lower sensitivity as the child grows and gains weight. A thicker mattress will
also need a higher sensitivity.
Slide the Nursery Unit sensitivity level button to select between low, medium or high level.
For optimal results begin with the preset sensitivity
level and only increase/decrease if required.
IMPORTANT
• The Sensor Pad is not designed for use with adults, children or infants older than 24 months.
• Once you are finished using the Sensor Pad, please remove it from the baby's and store it away.
30
All manuals and user guides at all-guides.com
Place your hand back
on the mattress.
1) From the Nursery Unit, press the Pause button on the top right of
1
the unit.
2) The light will flash white when the Sensor Pad is paused. The Nursery
Unit will emit a single beep every 20 seconds to indicate movement
function is paused.
2
3) To unpause the Sensor Pad press the Pause button again.
OR
Press Pause
on the Nursery
Unit