OPERATION
Timed operation
To set the appliance to switch off after a
specific duration:
l set the function selector knob and the
temperature selector knob to your pre-
ferred settings,
repeatedly until the display
l Touch
MENU
shows dur (duration) briefly and the
symbol will be flashing,
l set the desired duration from 1 minute to
10 hours using the
< / > sensors.
The set duration will be memorised after
about 7 seconds. The display will show the
current time and the
Once the duration time has elapsed the
oven will turn off automatically. You will hear
an alarm and the
flashing,
l Set the oven function selector knob and
the temperature selector knob in off posi-
tion.,
l Touch and hold < / > or
alarm. The
and
display will show the current time after
approximately 7 seconds.
symbol.
and
symbols will be
to mute the
MENU
will be off and the
Delayed timed operation
In order to set the appliance to switch off at a
specific time after a set Duration has elapsed,
set the Duration and the End Time:
l Touch
MENU
shows dur (duration) briefly and the
symbol will be flashing,
l set the desired duration from 1 minute to
10 hours using the
< / >sensors,
l Touch
MENU
shows End briefly and the
be flashing,
l set the End Time using the < / >, sensors,
a maximum of 23 hours and 59 minutes
ahead,
l set the function selector knob and the
temperature selector knob to preferred
settings. The
active. The appliance will switch on at
End Time minus Duration (i.e. if the set
Duration is 1 hour and the set End Time
is 14:00, the appliance will automatically
switch on at 13:00).
Once the Duration time has elapsed the oven
will turn off automatically. You will hear an
alarm and the
l Set the oven function selector knob and
the temperature selector knob in off posi-
tion.,
l Touch and hold < / > or
alarm. The
display will show the current time after
approximately 7 seconds.
47
repeatedly until the display
repeatedly until the display
symbol will
and
functions are now
and
will be flashing,
to mute the
MENU
and
will be off and the