KERN CFS Serie Manual De Instrucciones página 236

5. Automatic zero tracking
on display change
 Press
, the current setting will be displayed.
Select desired setting by
balance returns to the menu.
 Select the next menu point „0 AUto" with
6. Manual zero tracking
Range of loads in which the display will be set to zero after
actuation of the zero key.
 Press
, the current setting will be displayed.
Select desired setting by
balance returns to the menu.
 Select next menu point „Pin" with
7. Password for menu access „tECH"
 Press
and input new password with numeric keys.
Confirm with
 Confirm with
successful input, „donE" will be displayed; „FAIL" will be
displayed on faulty input.
 Select the next menu point „GrA" with
Adjustment or linearization must be done after configuration.
Implementation of adjustment cf. chapter 14. / Linearization cf. chapter 15.
60
and confirm with
and confirm with
and repeat password input.
, the scale will return to its menu. On
Repeat input in this case.
, the
.
, the
.
.
„AZt"

„AZn" „2d"

„AZt"
„0 mAnL"

„0 mAnL" „2"

„Pin"
„Pin"

„Pin1" „----„

„Pin2" „----„
„donE"
CFS/CCS-BA-e-1523