Titan T9500 Manual Del Usuario página 13

To rewind: Turn off and unplug the vacuum cleaner. Hold the plug while rewinding to
3. Set the nozzle connector to the upright position. Connect the telescoping wand to the
nozzle connector. Press the Handle Release Pedal.
4. Select a pile height setting by pressing the HEIGHT ADJUST pedal on the rear of the
motorized nozzle. The pile height setting shows on the indicator. See SUGGESTED
PILE HEIGHT SETTINGS (page 17).
Attention: Refer to your carpet manufacturers cleaning recommendations. Some more
delicate carpets may require that they be vacuumed with the nozzle agitator turned off to
prevent carpet damage.
5. Select a position on the handle three-way On/Off switch.
CARPET - turns on both the canister and the motorized nozzle.
Headlight and agitator will come on.
FLOOR - turns on the canister motor only.
Headlight and agitator will not power on.
OFF - Turns vacuum cleaner off.
NOTE - When this switch is in the FLOOR position the nozzle headlight
CAUTION
DO NOT leave the motorized nozzle running in one spot for any length of time. Damage
to carpet may occur.
Handle
Release
Pedal
Height
Adjustment Pedal
Height
Adjustment Indicator
-13-
CARPET
FLOOR