Titan T9500 Manual Del Usuario página 35

TO CLEAN AGITATOR:
NOTE:
cleaner, the agitator must be cleaned every time the belt is changed.
The agitator must also be cleaned according to the following schedule:
Vacuum Cleaner Use
HEAVY - (used daily)
MODERATE - (used 2-3 times/week)
LIGHT - (used 1 time/week)
IMPORTANT
Disconnect vacuum cleaner from electrical outlet. Check and remove hair, string and
lint build-up frequently in the motorized nozzle agitator and end cap areas.
Remove any dirt or debris in the belt path area or in the brush roller area.
Carefully remove any string or debris located on the agitator or end caps.
TO REPLACE BELT
NOTE: Use replacement belt, see part number detail in REPLACEMENT PARTS (page 7).
1. Install new belt over motor drive, then over belt path.
Clean Agitator
every week
every month
every 2 months
End Cap
Motor
Drive
Belt Path
End Cap
Agitator
-35-
Belt Path
End Cap
Brush Unit