Optelec ClearView+ Manual Del Usuario página 11

Optelec
 When moving the ClearView
the monitor from the base unit for safe and easy
transportation. Carry the ClearView
the two grips located on either side of the base unit table
mid-way between the front and back of the unit at table
level.
 Always turn the power off when the CV
 Always unplug the CV
damp cloth to clean the exterior surfaces. Do not use any
cleaning agents or any abrasive materials as these will
damage your CV
 Only use the mains power supply provided.
English
+
+
before cleaning it. Use a soft,
+
.
to another location, remove
+
base unit by using
+
is not in use.
+
ClearView
9