Feature Pack Advanced; Switching Between The Clearview; External Source - Optelec ClearView+ Manual Del Usuario

Optelec

5.2 Feature Pack Advanced

The Feature Pack Advanced contains all the features of the
Feature Pack Basic and adds the line marker, window
shade and PC-switch functions. For a description of the
semi-colors and position locator functions, please refer to
section 5.1 Feature Pack Basic.
Switching
computer / external source image
If a computer or another external source is connected to the
+
ClearView , press this button or the footswitch if fitted to
toggle between the ClearView
computer image.
To display the computer image on your ClearView
correctly, make sure that your computer's resolution is set
accordingly:
For the ClearView

must be set to 1366 x 768.
For the ClearView

must be set to 1680 x 1050.
For the ClearView

must be set to 1920 x 1080.
Please note: If your ClearView
with a 22" TFT monitor, pressing this button will allow
you to toggle between the ClearView
split-screen (showing both the ClearView
computer image in the ratio 50:50) and full screen
English
between the
+ 18" TFT monitor, the resolution
+
22" TFT monitor, the resolution
+
24" TFT monitor, the resolution
+
ClearView
+
image and the full screen
+
color unit is equipped
+
ClearView
and a
+
monitor
image, vertical
+
image and
+
18