Auto Zoom On/Off; Adjusting The Auto Zoom - Optelec ClearView+ Manual Del Usuario

+
Optelec ClearView
position locator functions, please refer to section 5.1
"Feature Pack Basic".

Auto Zoom ON/OFF

Press this button to activate the Auto Zoom function.
The Auto Zoom function will automatically display the text
that is placed on the reading table in your preferred fixed
font size regardless of the original document font size.
When the Auto Zoom function is activated, the zoom ring
located in the centre of the reading table will be disabled.
Such functions as viewing mode, semi-colors, position
locator and brightness will still be available.
Press the Auto Zoom button once again to return to the
manual zoom mode.

Adjusting the Auto Zoom

The fixed font size function of the Auto Zoom feature
may be adjusted by turning the Auto Zoom button.
Turn the button clockwise to increase the fixed font
size and counter-clockwise to decrease it.
English 21