Publicidad
Idiomas disponibles
Idiomas disponibles
Action
Inspect the tightness of the bolts
and nuts
Check the conditions of cutting
attachments and guard
Check fuel line leak tightness
Clutch
cone
and
lubrification
Clean the air filter
Clean the air filter
Check
Clean the fuel filter
Replace the fuel filter
Clean the spark plug and readjust
the gap between the electrodes
Replace spark plug every 100
hours of use
Clean the carburettor primer bulb
Clean the fuel tank
Check the idle speed
Check/adjust valve gap
Check the gap in the impeller
Check the fuel line
Check the combustion chamber
(1) Perform frequent maintenance tasks when the equipment is used in dusty areas.
(2) These items should be serviced by the service dealer unless you have the appropriate tools and mechanical knowledge.
1st month or
20 hours
shaft
(1)
Every 3 months
Every 6 months
or 50 hours
Every 2 years (replace if necessary) (2)
After 500 hours (2)
Every year or
or 100 hours
300 hours
(2)
(2)
(2)
Publicidad
