Connecting The Twinview To The Clearview; 5Connecting The Twinview To The Pc; Twinview Intelligent Split Screen Software Setup - Optelec TwinView Manual Del Usuario

Optelec
 When using the TwinView with a ClearView+, use the 12V DC monitor power cable to
connect and power the TwinView from the ClearView+ monitor power socket, located
on the back of the ClearView+ (please refer to the Installation Guide).
 When using the TwinView with another video magnifier than the ClearView+, use the
adaptor cable to connect a standard ClearView+ power supply to the TwinView
monitor's DC jack. The ClearView+ power supply needs to be ordered separately.
Please contact your Optelec distributor for more information.

3.2.4 Connecting the TwinView to the ClearView+

The TwinView supports two input channels, channel A and channel B. Per channel, the
TwinView has a VGA and DVI connection. To connect a device either the VGA or DVI
connection can be used, depending on the device to be connected and your personal
preference. The two connections per channel make it possible to connect a maximum of
four devices to the TwinView, of which the output from two devices can be displayed
simultaneously in a horizontal or vertical split.
Channel A is reserved to specifically connect the TwinView to a ClearView+ system. To
connect the ClearView+, use the included VGA cable and connect the ClearView+ VGA
monitor connection to the TwinView channel A VGA connection.
Please note: If you connect another video magnifier than the ClearView+ using the
channel A DVI connection, the video source selection in menu A needs to be set to DVI.
Please refer to chapter 5, "The TwinView Menu Setup".
3.2.5 Connecting the TwinView to the PC
The TwinView supports two input channels, channel A and channel B. Per channel, the
TwinView has a VGA and DVI connection. To connect a device either the VGA or DVI
connection can be used, depending on the device to be connected and your personal
preference. The two connections per channel make it possible to connect a maximum of
four devices to the TwinView, of which the output from two devices can be displayed
simultaneously in a horizontal or vertical split.
Channel B is reserved to specifically connect the TwinView to a PC. To connect a PC, use
the use the included VGA or DVI cable and connect the PC to the TwinView channel B
connection.
Please note: If you connect the PC using the channel B DVI connection, the video source
selection in menu B needs to be set to DVI. Please refer to chapter 5, "The TwinView
Menu Setup".
Please note: For optimal image quality, Optelec recommends to set the PC's resolution to
full HD 1920x1080. Please refer to your Microsoft Windows or operating system's manual
or help system on how to change the monitor resolution.
3.3

TwinView Intelligent Split Screen Software Setup

To use the intelligent split screen functionality of the TwinView and combine the images of
both the Optelec ClearView+ and a PC simultaneously on a single monitor, connect both
the Optelec ClearView+ and a PC to the TwinView as described in the previous two
paragraphs. Connect the USB cable to the TwinView and the PC.
TwinView
Page 11