Declaration Of Conformity - ELO ASC18-2.7 Manual

Important Information
If any part of your pressure cooker needs replacing, please ensure that you use
an original spare part. For successful cooking with the pressure cooker, it must be
one quarter to maximum two­thirds full of liquid including all ingredients. When
cooking dishes which create froth, the pot should never be more than half full.
Take care to ensure that not all the liquid evaporates, as this could lead to dam­
age. Disposal: please dispose of your pressure cooker as residual waste. Contrib­
ute to the protection of the environment. There is a public return system for the
disposal of packaging material and old appliances. For further information on
addresses and business hours, please consult your local administrative authority
or the consumer advice centre.
Guarantee
The pressure cooker is made of high­quality 18/10 stainless steel and will last
almost a lifetime if correctly used and looked after. We guarantee that the
pressure cooker is free from material and design defects. The materials used
in its manufacture have the highest quality standards. If, despite our careful
inspection processes, your pressure cooker needs repairing within four years of
purchase, and this is clearly due to a manufacture or material defect, this will
be carried out free of charge. Please use the address shown opposite for any
claims under guarantee and for ordering spare parts.
We hereby confirm that the mentioned pressure cookers comply with the appli­
cable EU­directive (Pressure equipment) 2014/68/EU and are manufactured in
bulk accordingly. Furthermore, the products also comply with the standard DIN
EN 12778:2005­09 which is required in order to obtain the CE­symbol.
34

Declaration of conformity

according to Directive 2014/68/EU
for a pressure equipment
The manufacturer
ELO­Stahlwaren Karl Grünewald
& Sohn GmbH & Co. KG
Dalberger Straße 20
55595 Spabrücken
GERMANY
herewith declares, that the pressure equipment
Description:
Year of manufacture:
Type­, Serial­, Identification­No:
Chamber designation:
max. allowable pressure PS:
Volume V / Diameter DN:
Test pressure PT:
Date of pressure test:
Pressure test medium:
Fluid­ fluid group:
complies with the requirements of the Pressure Equipment Directive 2014/68/EU.
Applied conformity assessment procedures:
Applied standards and technical specifications:
Spabrücken, 14.05.2020 ________________________________
Location, Date:
TÜV SÜD – PED Professional
35
UK
Pressure Cooker
2020
ASC18­2.7, ASC18­3.2, ASC22­3,
ASC22­4, ASC22­6, ASC22­7
2
3.0 bar
2.7L, 3.2L, 3L, 4L, 6L, 7L
5.0 bar
2020­04­10
Water
2
Module B
EN 12778:2002/A1:2005
Signature