Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
f)
Do not spray the device with a water jet or submerge it in water.
g)
Do not allow water to get inside the device through vents in the housing of the
device.
h)
The device must be regularly inspected to check its technical efficiency and
spot any damage.
i)
Use a soft cloth for cleaning.
j)
Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a metal
spatula) because they may damage the surface material of the appliance.
k)
Do not clean the device with an acidic substance, agents of medical purposes,
thinners, fuel, oils or other chemical substances because it may damage the
device.
l)
Before first use, remove all elements and clean them along with the entire
device.
m) If the device is not used for a period longer than 3 weeks, empty it of its
contents, turn it off, disconnect the cable from the power source and leave the
door slightly open to prevent the accumulation of moisture, mould and
unpleasant odours.
Cleaning
• Disconnect the device from the power source.
• Clean the inside of the device with warm water and a neutral detergent. To
ensure its efficient operation, thoroughly clean the rear and bottom part of the
interior of the device. Use soap and water to clean the door seal.
• Thoroughly dry all surfaces.
• Reconnect the device to the power source.
DISPOSING OF USED DEVICES
Do not dispose of this device in municipal waste systems. Hand it over to an electric
and electrical device recycling and collection point. Check the symbol on the
product, instruction manual and packaging. The plastics used to construct the device
can be recycled in accordance with their markings. By choosing to recycle you are
making a significant contribution to the protection of our environment.
Contact local authorities for information on your local recycling facility.
Publicidad
Tabla de contenido
