Specifications/Classifications; Warranty - Drive DeVilbiss Healthcare Vacu-Aide 7325 Serie Guía De Instrucciones

SPECIFICATIONS/CLASSIFICATIONS

Size
7325P & 7325D Series
Weight
7325P Series
7325D Series
Electrical Requirements
Internal Rechargeable Battery
7325P Series
7325D Series
Vacuum Range
7325P & 7325D Series
Air Flow @ pump inlet
Container Capacity (The capacity of the collection container is 90% of the container's fill level when operated up to a 20˚ tilt angle in any direction.)
7325P & 7325D Series
7325P & 7325D Series - Optional
Environmental Conditions
Operating Temperature Range
Operating Relative Humidity
Operating Atmospheric Pressure
Storage & Transport Temperature Range
Storage & Transport Relative Humidity
Limited Warranty
7325P Series
7325D Series
Internal Battery
Approvals
7325P & 7325D Series
Equipment Classifications
With respect to protection from electric shock
Degree of protection against electric shock
Degree of protection against ingress of liquids
Mode of Operation
Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide.
ISO Classification
7325P Series only - Electrically powered medical suction equipment for transport use according to EN ISO 10079-1:2015
High Vacuum/High Flow
7325D Series - Electrically powered medical suction equipment for non-transport use according to EN ISO 10079-1:2015
Disposable Container with Internal Filter Patent: US9457135
* Conditions may vary based on altitude above sea level, barometric pressure, and temperature.
Typical operating sound level is <59 dBA as tested per ISO 10079-1:2015.
LIMITED WARRANTY
Drive DeVilbiss Healthcare warrants the Drive DeVilbiss Vacu-Aide Suction Device (excluding carrying case and collection container) under the conditions and limitations stated below.
Drive DeVilbiss warrants this equipment to be free from defects in workmanship and materials for two (2) years (Internal rechargeable battery is warranted for one (1) year) from date of
factory shipment to the original purchaser (typically the healthcare provider). These warranties are limited to the Buyer of new equipment purchased directly from Drive DeVilbiss, or one
of its Providers, Distributors, or Agents. Drive DeVilbiss' obligation under this warranty is limited to product repair (parts and labor) at its factory or at an Authorized Service Center.
Routine maintenance items, such as filters, are not covered under this warranty, nor does it cover normal wear and tear.
Warranty Claims Submissions
The original purchaser must submit any warranty claim to Drive DeVilbiss or to an Authorized Service Center. Upon verification of the warranty status, instructions will be issued. For all
returns, the original purchaser must (1) properly package the unit or parts in a DeVilbiss approved shipping container, (2) properly identify the claim with the Return Authorization
Number, and (3) send the shipment freight prepaid. Service under this warranty must be performed by Drive DeVilbiss and/or an Authorized Service Center.
NOTE– Be sure to retain a dated proof of purchase document to verify unit is within 2-year warranty period.
NOTE– This warranty does not obligate Drive DeVilbiss to provide a loaner unit during the time that a suction device is undergoing repair.
NOTE– Replacement components are warranted for the unexpired portion of the original Limited Warranty.
A-7325
H x W x D inches (cm)
6.9" x 7.0" x 7.1" (17.5 cm x 17.8 cm x 18.0 cm)
lb. (kg)
3.8 lb (1.72 kg) not including power supply
3.4 lb (1.54 kg) not including power supply
100-240 V ~ 50/60 Hz .75 A max; 12 V DC, 33 W max
Factory Equipped
Not Factory Equipped
50 to 550 mm Hg +/- 5%
27 LPM (free flow) typical (may be less when running from internal battery)*
800 ml (cc) Disposable (2 filter options)
1200 ml (cc) Reusable
0˚C to 40˚C (32˚F to 104˚F)
15-93% non-condensing
770 hPa to 1060 hPa (~7500 ft to ~1400 ft below sea level)
-25˚C to 60˚C (-13˚F to 140˚F)
0-93% non-condensing
Two-year Limited, excluding container
Two-year Limited, excluding container
One-year Limited
IEC 60601-1:2005+AMD1:2012; EN 60601-1-2: 2015; ISO 10079-1:2015; IEC 60601-1-2:2014; IEC 60529:1989+AMD1:1999
+AMD2:2013; IP33; IEC 60601-1-6:2010; IEC 60601-1-11:2010
CONFORMS TO AAMI STD. ES 60601-1, AAMI STD. HA 60601-1-11, IEC STD. 60601-1-6, ISO STD. 10079-1
CERTIFIED TO CSA STD. C22.2 NO. 60601-1, NO. 60601-1-11, IEC STD. 60601-1-6, ISO STD. 10079-1
Class II and internally powered
Type BF Applied Parts
IP33 and ordinary power supply
Non-Continuous Operation: 30 minutes on, 30 minutes off
EN - 17