Teac CD-P1260 Manual Del Usuario página 15

To check the programmed order
In the stop mode, press the PROGRAM button repeatedly.
The track number and program number will be shown on the
display.
To add a track to the end of the program
In the stop mode, press the PROGRAM button repeatedly
until "00" appears on the display. Select a track number
using the numeric buttons or the Skip button (.or/)
and then press the PROGRAM button. The track is added to
the end of the program.
To overwrite the program
In the stop mode, press the PROGRAM button repeatedly
until the program number to be changed appears on the
display.
Select a new track number using the numeric buttons or the
Skip button (. or/ ) and then press the PROGRAM
button.
To clear program
To clear the programmed contents, press the PROGRAM and
the STOP button (H) in the stop mode.
< If the OPEN/CLOSE button or the POWER switch is pressed,
the programmed contents will also be cleared.
15