Dell PowerEdge 4400 Instrucciones De Actualización página 2

All manuals and user guides at all-guides.com

     
       
          

  ! "   # $   
         % 
   
 
 
To remove the air baffle, grasp the microprocessor assembly and slowly peel the air
baffle from the upper surface of the heat sink (see Figure 1-2).
heat sink
air baffle

     
For details on installing the new microprocessor, see "Upgrading the Microprocessor
or Installing a Secondary Microprocessor" in your system's Installation and Trouble-
shooting Guide.
____________________
Information in this document is subject to change without notice.
© 2000 Dell Computer Corporation. All rights reserved. Printed in the U.S.A.
Trademarks used in this text: Dell, the DELL logo, and PowerEdge are trademarks of
Dell Computer Corporation. Other trademarks and trade names may be used in this document to
refer to either the entities claiming the marks and names or their products. Dell Computer
Corporation disclaims any proprietary interest in trademarks and trade names other than its own.