HoMedics BPA-960BT Manual página 24

Using Single Measurement Mode:
1. Please make sure the Triple-Check switch, located on the
back of the unit, is in the OFF position.
2. Press the USER-SELECT button to choose User 1 or User 2.
M
After the user number is selected, press the START/STOP
button to confirm the chosen user.
3. With the cuff wrapped around your arm, press the START/
STOP button. Do not inflate the cuff unless it is wrapped
around your arm. All digits will light up to check the display
functions. The checking procedure will be completed after
about 3 seconds.
START
STOP
Note:
If the Rest Assure Function is ON, the 5 minute countdown will
begin after the checking procedure is complete.
23