Recalling Values From Memory - HoMedics BPA-960BT Manual

RECALLING VALUES FROM MEMORY

1. Press the USER-SELECT button to select User 1 or User 2.
2. Press the M button to access memory.
3. The monitor will first display the calculated average applied
to the last 3 memories.
Note:
• If the last 3 readings was a Triple-Check average, then the Triple-
Check average will be displayed.
• Memory averaging function will only average individual readings.
• Every new press of the M button will recall a previous reading. The
latest reading will be recalled first.
Note:
While reviewing the readings, the Triple-Check Average icon may
appear on the screen. Press the + button to review individual readings
that make up the Triple Check average.
M
or
M
press the
+ button
32