AIRIS FRE-001 Manual De Instrucciones página 11

KNOW YOUR DEEP FRYER
Filter cover
Filter
Condensation tray
USING YOUR DEEP FRYER
For the first use
For the first use the oil tank and basket may emit odor, it is
normal and will not occur again. It is suggest to remove the
odor according to the instructions: Fill water to the MAX
marker (see Fig.1), heat it for about 10 minutes according to
the following steps at lowest temp., let it cool down completely then clean all
parts thoroughly. WARNING: wipe the droplets of water on oil tank and basket
out completely before fill oil in!
1. Press down open button, the lid of deep fryer will open automatically.
2. Uplift handle to horizontal position then take out.
3. Fill oil in oil tank, We recommend use fresh peanut, groundnut, vegetable or
rapeseed oil, use a good quality solid fat if you prefer but remember never to
mix your oils or fats. The solid fat must be melt gently in a separate pan
before transferring to the tank.
Note:1. Before adding oil in oil tank, press oil tank with force to ensure that it
has been contacted well, otherwise, make sure the outside surface is
dry.
2. The oil level should between MIN (1.8L) and MAX (2.2L ) (see
Lid
Basket
Open button
The temp. control bar
GB - 10
Viewing window
Oil tank
Release button
Handle
Power indicator
Timer