Installation - Wolf M Serie Guia De Instalacion

Installation

Preparation
IMPORTANT NOTE: When installed above a Cup Warming
Drawer, use the top surface of the Warming Drawer as a
reference to position the slides (there will be no surface to
rest the slides on).
Secure the provided power cord clip to the top of
1
the cabinet opening, centered and approximately 14"
back from the front edge. Refer to the illustration
(356)
below.
2 Verify the sides of the cabinet opening are adequate
to support installation of the slides. If necessary, install
additional side cleats to maintain the opening width.
3 The provided spacer material can be added under or to
the sides of the cabinet.
POWER
CORD CLIP
C L
Install power cord clip
8 | Wolf Customer Care 800.222.7820