Making Coffee - T-Fal CM362BMX Manual De Instrucciones

USE
Before using for the first time
• Use your filter coffee maker without coffee the first time using the
equivalent of a jug of water to rinse the circuits.

Making coffee

(Follow figures 1 to 8)
• Use only cold water.
• Do not exceed the maximum water level indicated on the tank.
• This coffee maker is equipped with a drip stop so that you can serve
coffee before the cycle ends. Replace the jug immediately in order to
avoid overflowing.
• Wait a few minutes before you make coffee a second time.
Programming
Setting the time
• Plug in the coffee maker. The LCD screen (d) will display AM 12:00 and
flashes for a few seconds.
• Press the H Button in order to set the hour. You may do this repeatedly,
or continually for faster hour progression.
• AM indicates morning hours and PM, afternoon and evening hours.
• Once you have set the hour, press the MINI button for minutes and
follow the same procedure.
• Once the minutes are set, wait for the flashing to stop and the set time
will be validated. Otherwise, press the
• The programming will have to be repeated in case of a blackout or if the
coffee maker is unplugged.
• PLEASE NOTE: You can set or adjust the time at any moment. Hold the
button down for a minimum of 3 seconds
the screen, you may adjust the time using the H and Min buttons.
Program mode functioning
• In order to program your coffee maker, press the PROG button once.
• Set the hour and minutes according to the time you wish your coffee
maker to start (please refer to "Programming", above).
• Validate the set time by pressing the PROG button once more.
10
(j) button once.
. Once the time flashes on