Wear Parts - PROPAIN Trickshot Manual De Instrucciones

// USER MANUAL
Carbon components have a limited service life. Handlebar, seatpost, stem, cranks and carbon wheels should be replaced at regular intervals (e.g. every three years). Intense heat permanently damages the
carbon structure. Carbon components must not be stored near heat sources or in direct sunlight inside a vehicle.
2.7 MOUNTING COMPONENTS AND ACCESSORIES
Bike trailers must only be fixed to the rear axle of the bike using special hitching devices. The connecting element between trailer and bike frame must not touch the bike frame. Child seats and trailers with
clamp mounting on the seat post or frame must not be used. No racks may be attached to the seat post or frame. Please check the operating instructions of the respective manufacturer before mounting
components and accessories. The maximum system weight (see „2.10 Weight limit" on page 20) must not be exceeded even with mounted components and accessories!
2.8

WEAR PARTS

The components listed below should be checked regularly and replaced, if required:
• Tires and tubes
• Rims
• Brake rotors and brake pads
• Bearings (headset, bottom bracket, hub bearing)
• Chain, cassette and sprocket
• Handlebars, stem and grips
• Saddle and seatpost
• Grease, lubricant, hydraulic oil and brake fluid
• Shift cables and housings
• Fork
• Stickers and paintwork