PROPAIN Trickshot Manual De Instrucciones página 31

// USER MANUAL
6. ACTIVITIES BEFORE AND AFTER THE RIDE
6.1 BEFORE THE RIDE
For the safe use of your bike, you should perform certain tasks before riding. If there are any defects or faults, your bike must be checked by a trained bicycle mechanic and the defects must be rectified.
Never ride with a defective bike!
TASK/CHECK
Lift the front and rear wheels one after the other and turn the wheels.
→ The wheels must turn smoothly.
→ The wheels must turn straight, without lateral or vertical runout.
→ The tires must not rub against the frame.
Check the tire pressure.
→ The tire pressure should be about 2 bar. The maximum tire pressure of the wheel and of the tire used must not be exceeded (see also „8.4 Tire
pressure" on page 42).
Check the tightening torque of the axles.
→ The thru axle of the front wheel must be tightened to 2.2 Nm and the bolts of the dropouts of the fork to 2.2 Nm
→ The axle nuts of the rear wheel must be tightened with 18 Nm!
Lift the front and rear wheels one after the other and move the wheels sideways.
→ No play should be noticeable.
Check the freewheel system of the rear wheel hub to ensure that the connection is working properly:
Get on your bike, pull the front brake and pedal with moderate effort while stationary.
→ The power must be transmitted to the rear wheel.
→ The freewheel must not slip.
Check the tires for damage and wear.
→ There must be no damage.
→ The tyres must not be so worn that the puncture protection belt or the carcass threads can be seen through the tread.
Before the first ride Before every ride
X X
X X
X X
X
X
X