PROPAIN Trickshot Manual De Instrucciones página 6

// MOUNTING THE FRONT WHEEL
1
Loosen the screws of the dropouts of the fork and remove
the thru axle.
4
Tighten the thru axle with a hex key to 2.2 Nm.
2
Remove the transport lock between the brake pads and store
it for later transport of your bike.
5
Tighten the screws of the dropouts with 2.2 Nm each.
3
1. Put the front wheel into the dropouts of the fork. The
brake rotor must be placed between the brake pads.
2. Insert the thru axle from the drive side (in riding
direction on the right) through the dropouts of the fork
through the hub of the wheel.