PROPAIN Trickshot Manual De Instrucciones página 8

// MOUNTING THE PEDALS
1
R
One of your pedals has a right-hand thread and the other a
left-hand thread. Most pedals are marked with "L" and "R" for
the mounting side. On some pedals, the left pedal is marked
with a groove on the axle.
1. Slightly grease the pedal thread.
2. If washers were provided with the cranks of your bike, fi t
them on the pedal threads.
3. Turn the left pedal counterclockwise into the thread in
the left crank arm and tighten the pedal with a tightening
torque of 35 Nm.
4. Turn the right pedal clockwise to screw it into the thread
of the right crank arm and tighten the pedal to a torque
of 35 Nm.
// MOUNTING THE SADDLE
1
L
Unscrew the bolts of the saddle clamp and remove the upper
clamp.
2
1. Attach the upper clamp to the saddle frame.
2. Adjust the saddle to your personal preferences and
screw in the clamping bolts.