Publicidad
support@nextlevelracing.com
PRE-RACE
CHECKS
WARNING
•
Please do not use power tools for assembly as over tightening can damage parts.
•
If in doubt consult the installation video or contact us on support@nextlevelracing.com
•
T-Nuts can not be installed mid channel. Must be installed from the ends of extrusion.
•
Plan the placement of cable management clips at the start of your build.
•
Please ensure T-Nuts are correctly placed within the extrusion.
•
Lay out and build on a level surface.
•
Beware of sharp edges on extrusion pieces.
•
Do not force parts together.
•
Avoid cross threading bolts.
If you require any support with your product please contact our friendly
team at: support@nextlevelracing.com
ALUMINIUM EXTRUSION TIPS
•
Please do not use power tools for assembly as over tightening can damage your frame.
•
Please ensure T-Nuts are correctly placed within the extrusion.
•
Beware of sharp edges on the extrusion pieces.
•
Do not force parts together.
•
Avoid cross threading bolts.
WARNING
CHOKING HAZARD - Small parts not for children under 3 years
or any individuals who have a tendency to place inedible objects
in their mouths.
ASSEMBLY
VIDEO
bit.ly/nlrbuild
4
IN THE
BOX
*NOT TO SCALE
)
(
L
R
MOTION BRACKETS
M8 & M6 ALLEN KEYS
4 x STEEL END CAPS
12 x M8 85mm BOLTS
8 x M8 45mm BOLTS
4 x M8 16mm BOLTS
6 x M8 20mm COUNTERSUNK BOLTS
12 x M8 FULL WIDTH T-NUTS
28 x M8 WASHERS
NOTE: Some Items Come with Rust Resistant Coating
Video Instruction: bit.ly/nlrbuild
(
)
FRONT
(
)
REAR
TRACTION BASE MEMBERS
MOTION SAFETY STEP
1 x LEFT END CAP (40 x 80)
1 x RIGHT END CAP (40 x 80)
5
Publicidad
