Publicidad
support@nextlevelracing.com
04
Remove the Seat Slider Assemblies and uninstall the Bolts securing the Buttkicker Pole to the
Seat Slider Assembly. Uninstall the Buttkicker Pole.
05
Uninstall the Countersunk Bolts securing the Seat Slider End Plates to the Seat Slider Members and
remove the Seat Slider End Plates.
(
T-NUT LOCATION
(
T-NUT LOCATION
)
(
T-NUT LOCATION
)
06
Install 2 x T-Nuts into the top and bottom channel of both Seat Slider Members.
PARTS:
• • NIL
PARTS:
• • NIL
PARTS:
• • 8 x FULL WIDTH T-NUTS
)
(
)
T-NUT LOCATION
8
07
Align the holes on the Steel End Caps with the threaded holes on the ends of the
Seat Slider Members.
08
Bolt through and secure with M8 Countersunk Bolts previously uninstalled in Step 05.
09
Uninstall the End Caps at the rear of the Base Members.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 4 x STEEL END CAPS
PARTS:
• • NIL
PARTS:
• • NIL
9
Publicidad
