Publicidad
support@nextlevelracing.com
17
Bolt through and secure the Rear Seat Slider Assembly with 2 x M8 Bolts and Washers.
18
Bolt through and secure the Front Seat Slider Assembly with 2 x M8 Bolts and Washers.
19
Align the slots on the GTELITE Seat Brackets with the T-Nuts previously installed in Step 06.
14
PARTS:
• • 2 x M8 16mm BOLTS
• • 2 x M8 WASHERS
20
PARTS:
• • 2 x M8 16mm BOLTS
• • 2 x M8 WASHERS
21
PARTS:
• • 4 x FULL WIDTH T-NUTS
Bolt through and secure with M8 Bolts and Washers previously uninstalled in Step 01.
Your Setup is complete.
TRACTION PLUS PLATFORM
SETUP
15
Video Instruction: bit.ly/nlrbuild
PARTS:
• • NIL
PARTS:
• • NIL
Publicidad
