Operating The Controls; For Best Results - Faber FLEXA FLEX24SS300 Instrucciones De Instalación

OPERATING THE CONTROLS

FOR BEST RESULTS

Start the Range Hood several minutes before cooking to develop proper
airflow. Allow the Range Hood to operate for several minutes after cooking
is complete to clear all smoke and odors from the kitchen.
All controls are located on the right side of the rangehood
L Light
M-V Motor/
Speed
Automatic Operation
As long as the blower and light switches are on, the blower and light will automatically
operate when the visor is opened and shut off when the visor is closed.
22
The On/Off switch for the light is located behind the front trim.
Moving the switch to the 1 Position turns the light On.
Moving the switch to the 0 Position turns the light Off.
M-V shows the speed control switch for the blower.
Moving the switch to the 1 Position turns the blower on LOW.
Moving the switch to the 2 Position turns the blower on
MEDIUM.
Moving the switch to the 3 Position turns the blower on HIGH.
Moving the switch to the 0 Position turns the blower off.
L
M - V